Now onto the Boston Blockfront case top, the case top starts as a two board glue up of Mahogany 40 1/4 ” x 20 3/4″ x 13/16″. First we need to create the sliding dovetail socket that will attached the case top to the case sides. First we need to create a dado in the […]
Now on to the dust panel construction, the whole sub panel assembly is made of Yellow Poplar. Behind the Mahogany ‘drawer blade’ (or drawer divider) is the drawer blade sub-back, it gets glued to the front drawer blade and rides in a shallow 1/8″ deep x 7/8″ wide dado in case side. The drawer blade […]
First we are pattern routing the drawer blades using a 1/4 ” spiral double ball bearing flush trimming bit.. Next we need to need to start creating the beading on the drawer blades, this is done with a 3/8 slotting bit in two passes… Finally the actual bead is cut using a 3/32 radius beading […]