Next up is the all the jointery, first the bottom of the case sides and the case bottom are assembled using half bind dovetails cut into the case sides. The dovetail pins are cut by hand, then as a tip we borrowed from Glen Huey we remove much of the waste with a forsner bit […]
Next we need to cut the half blind dovetails on the bottom of the case sides. The first photo is of the dovetails marked out, then sawn, the pencil marks remind us which is the waste that needs to be removed.. […]
Here is where the Sketchup templates that have been printed and mounted to Baltic Birch plywood start to pay dividends, the next three pictures we are template routing the front moulding, then profiling the front and side base mouldings… Here we are attaching the prepared template to the 1 9/16″ thick Mahogany stock. Next after […]