Here is where the Sketchup templates that have been printed and mounted to Baltic Birch plywood start to pay dividends, the next three pictures we are template routing the front moulding, then profiling the front and side base mouldings...

 

Here we are attaching the prepared template to the 1 9/16" thick Mahogany stock.

 

Next after bandsawing the profile oversize then using a Whiteside spiral flush trimming bit to match the template exactly..

 

Next after profiling the front and side mouldings with a Whiteside Cove and Bead bit..

 

Nice and crisp profile..All that needs to be done is to cleaning up the sharp corners with some carving tools..

Go to top